Metal Angle Bracket
Metal angle bracket is made of steel sheet metal, and designed to connect wood to wall,timber to timber, to concrete, to steel.It's strong and punched with plenty of holes for screws or nuts to well fasten.
We are factory of metal angle bracket. There are lots of types of steel angle bracket:
- Material: mild steel, iron, stainless steel, cooper;
- Type: Truss plate connector,galvanized metal angle bracket,45 degree/right angle bracket, nail plate, flat plate, joist hanger etc
- Coating: zinc plated,hot dip galvanized,powder coating,stainless steel
- Coating thickness: Min 50 μ
- Hardness: 100HV
Size of metal angle bracket are listed below but not limited to:
L x W x H x T:
25x40x75x2,0mm
40X40x40x2,0mm
50x50x50x2,0mm
60X60x60x2,0mm
70X70x55x2,5mm
90X90X65x2,5mm
110X35X40x2,5mm
100X60X60x2,5mm
105x105X90x3,0mm
Welcome importer to visit us and check products. Feel free to write us message.
We are also specilized in producing pole anchors, steel fence post spike, fence post, metal stamping parts.